Peugeot 406

Since 1996 of release

Repair and car operation


Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. A suspension bracket and a steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward bearings of a nave
   11.4. A forward rack
   11.5. Repair of a forward rack
   11.6. The bottom lever of a forward suspension bracket
   11.7. The bottom spherical hinge of a forward suspension bracket
   11.8. The stabilizer of cross-section stability of a forward suspension bracket
   11.9. A side scene of the stabilizer of cross-section stability of a forward suspension bracket
   11.10. The bottom frame of a forward suspension bracket
   11.11. A nave of a back wheel
   11.12. Replacement of bearings of a back nave
   11.13. The shock-absorber of a back suspension bracket
   11.14. A cylindrical spring of a back suspension bracket
   11.15. A pin of a nave of a back suspension bracket
   11.16. The bottom lever of a back suspension bracket
   11.17. The top lever of a back suspension bracket
   11.18. The directing lever of a back suspension bracket
   11.19. Draught of a back suspension bracket
   11.20. The stabilizer of cross-section stability of a back suspension bracket
   11.21. A side scene of the stabilizer of cross-section stability of a back suspension bracket
   11.22. A steering wheel
   11.23. A steering column
   11.24. An intermediate shaft of a steering column
   11.25. The ignition lock
   11.26. The steering mechanism
   11.27. Replacement of protective covers of the steering mechanism
   11.28. Removal of air from system of a steering with the amplifier
   11.29. The pump of the amplifier of a steering
   11.30. The spherical hinge of steering draught
   11.31. Steering draught
   11.32. Corners of installation of wheels
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

11.2. Rotary fists
THE GENERAL DATA
The prevention

At installation it is necessary to use new nuts of the spherical hinge of steering draught, the bottom spherical hinge and tightening a bolt and a nut of a rotary fist.

Removal

PERFORMANCE ORDER
1. Remove a cap of a nave of a wheel, take R-shaped скобу.
2. Remove a head of blocking from a lock nut of a power shaft. Ослабьте a power shaft nut on the car standing on wheels. Also ослабьте bolts of fastening of a wheel.
3. Lift a forward part of the car and fix on supports. Remove a corresponding forward wheel.
4. On the cars equipped ABS, unscrew a bolt of fastening of the gauge established on a wheel of the car and take the gauge from a rotary fist.
5. Unscrew a nut of fastening of a power shaft.
6. Unscrew a nut, крепящую steering bent for to a rotary fist and take the spherical hinge of steering draught from a rotary fist. For extraction of the spherical hinge of steering draught from a rotary fist it is necessary to use a universal stripper of spherical hinges.
7. Remove a brake disk.
8. If it is necessary, unscrew bolts of fastening of a suspension bracket (are specified by arrows) to the top part of a rotary fist.
9. Unscrew a nut of fastening of the bottom spherical hinge and take a pin of the spherical hinge from the bottom lever.
10. Unscrew a nut and take tightening a bolt of a rack of a rotary fist, noticing that the bolt is established from the back party of the car. At installation it is necessary to use new tightening a bolt and a nut.
11. Remove a rotary fist from the end of a rack and with шлицов a power shaft. Remove it from the car. If the rotary fist densely sits on the bottom part of a rack, use the big screw-driver for a release of a clip of a rotary fist.

Installation

PERFORMANCE ORDER
1. Be convinced that шлицы on the external end of a power shaft and grooves in a nave the pure. Pull a nave over power shaft grooves.
2. Pull a rotary fist over the bottom part of a rack of a suspension bracket, levelling a crack in a rotary fist with a ledge on the rack end. Insert new tightening a bolt from the back party of the car, screw on a bolt a nut and tighten the demanded moment.
3. Combine the bottom spherical hinge with the bottom lever and fix it with use of a new nut.
4. Connect the spherical hinge of steering draught to a rotary fist and fix a new nut.
5. Establish a brake disk.
6. On the models equipped ABS, establish the gauge of rotation of a wheel.
7. Grease an internal part and a carving of a nut of fastening of a power shaft with pure engine oil and screw a nut on a power shaft. Fix a nut of fastening of a power shaft the demanded moment. Check up that the nave rotates freely, establish a head of blocking of a nut of a power shaft so that one of safety locks was combined with an aperture of a power shaft and fix its R-shaped скобой.
8. Establish a wheel and lower the car.