Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. A suspension bracket and a steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward bearings of a nave
   11.4. A forward rack
   11.5. Repair of a forward rack
   11.6. The bottom lever of a forward suspension bracket
   11.7. The bottom spherical hinge of a forward suspension bracket
   11.8. The stabilizer of cross-section stability of a forward suspension bracket
   11.9. A side scene of the stabilizer of cross-section stability of a forward suspension bracket
   11.10. The bottom frame of a forward suspension bracket
   11.11. A nave of a back wheel
   11.12. Replacement of bearings of a back nave
   11.13. The shock-absorber of a back suspension bracket
   11.14. A cylindrical spring of a back suspension bracket
   11.15. A pin of a nave of a back suspension bracket
   11.16. The bottom lever of a back suspension bracket
   11.17. The top lever of a back suspension bracket
   11.18. The directing lever of a back suspension bracket
   11.19. Draught of a back suspension bracket
   11.20. The stabilizer of cross-section stability of a back suspension bracket
   11.21. A side scene of the stabilizer of cross-section stability of a back suspension bracket
   11.22. A steering wheel
   11.23. A steering column
   11.24. An intermediate shaft of a steering column
   11.25. The ignition lock
   11.26. The steering mechanism
   11.27. Replacement of protective covers of the steering mechanism
   11.28. Removal of air from system of a steering with the amplifier
   11.29. The pump of the amplifier of a steering
   11.30. The spherical hinge of steering draught
   11.31. Steering draught
   11.32. Corners of installation of wheels
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions


11.29. The pump of the amplifier of a steering Removal

PERFORMANCE ORDER
1. Ослабьте a tension приводного a belt also remove a belt from a pump pulley. The pump of the amplifier of a steering is located above or below the alternating current generator, depending on engine type. If the pump is located under the generator, access to it is most convenient from below the car.
2. Using G-shaped clips, press submitting and returnable hoses about a nutritious tank.
3. Unscrew a nut and remove скобу hose fastenings in a back part of the pump.
4. Ослабьте a collar also remove submitting hose from the pump. Unscrew a nut and disconnect bringing pipe.
5. Unscrew bolts of fastening of the pump and remove it from an arm.
6. If the pump has defects, it is necessary to replace it in gathering.

Installation

PERFORMANCE ORDER
1. Establish the pump on an arm and fix bolts.
2. Connect bringing pipe to the pump and screw a connecting nut. Establish bringing pipe to the pump and fix a collar. Remove clips from hoses.
3. Establish скобу hose fastenings to a back part of the pump.
4. Establish приводной a belt on a pulley of the pump and adjust a tension.
5. Remove air from system.