Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. A suspension bracket and a steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward bearings of a nave
   11.4. A forward rack
   11.5. Repair of a forward rack
   11.6. The bottom lever of a forward suspension bracket
   11.7. The bottom spherical hinge of a forward suspension bracket
   11.8. The stabilizer of cross-section stability of a forward suspension bracket
   11.9. A side scene of the stabilizer of cross-section stability of a forward suspension bracket
   11.10. The bottom frame of a forward suspension bracket
   11.11. A nave of a back wheel
   11.12. Replacement of bearings of a back nave
   11.13. The shock-absorber of a back suspension bracket
   11.14. A cylindrical spring of a back suspension bracket
   11.15. A pin of a nave of a back suspension bracket
   11.16. The bottom lever of a back suspension bracket
   11.17. The top lever of a back suspension bracket
   11.18. The directing lever of a back suspension bracket
   11.19. Draught of a back suspension bracket
   11.20. The stabilizer of cross-section stability of a back suspension bracket
   11.21. A side scene of the stabilizer of cross-section stability of a back suspension bracket
   11.22. A steering wheel
   11.23. A steering column
   11.24. An intermediate shaft of a steering column
   11.25. The ignition lock
   11.26. The steering mechanism
   11.27. Replacement of protective covers of the steering mechanism
   11.28. Removal of air from system of a steering with the amplifier
   11.29. The pump of the amplifier of a steering
   11.30. The spherical hinge of steering draught
   11.31. Steering draught
   11.32. Corners of installation of wheels
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions


11.3. Replacement of forward bearings of a nave
THE GENERAL DATA

The prevention

Двухрядный the roller bearing does not demand any adjustments and has the greasing providing working capacity of the bearing on all service life of the car. At bearing installation it is necessary to use a new lock ring.


PERFORMANCE ORDER
1. Remove a rotary fist together with a nave from the car.
2. Establish a rotary fist on supports and, using tubular оправку, established on the internal end of a flange, squeeze out a flange from the bearing. If the internal ring of the bearing remains on a nave, remove it, using a stripper for bearings.
3. Remove (marksman) a lock ring of fastening of the bearing from the internal end of a rotary fist.
4. If necessary establish an internal ring of the bearing back and, опирая an internal part of a rotary fist on supports, using tubular оправку, squeeze out the bearing from a rotary fist.
5. Clear a nave and a rotary fist of a dirt and greasing.
6. Grease with a thin layer of greasing Molykote 321 R an external ring of the bearing and a plug flange.
7. Reliably fix a rotary fist on supports and establish in it the bearing. Bearing installation make with use tubular оправки which should press on an external ring of the bearing.
8. Fix the bearing a new lock ring which should be established in flutes in a rotary fist.
9. Establish the plug lateral aspect on a support and establish an internal ring of the bearing on the end of a flange of the plug. Bearing installation make, using tubular оправку which presses on an internal ring of the bearing.
10. Establish a rotary fist together with a nave on the car.