Peugeot 406

Since 1996 of release

Repair and car operation


Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. A suspension bracket and a steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward bearings of a nave
   11.4. A forward rack
   11.5. Repair of a forward rack
   11.6. The bottom lever of a forward suspension bracket
   11.7. The bottom spherical hinge of a forward suspension bracket
   11.8. The stabilizer of cross-section stability of a forward suspension bracket
   11.9. A side scene of the stabilizer of cross-section stability of a forward suspension bracket
   11.10. The bottom frame of a forward suspension bracket
   11.11. A nave of a back wheel
   11.12. Replacement of bearings of a back nave
   11.13. The shock-absorber of a back suspension bracket
   11.14. A cylindrical spring of a back suspension bracket
   11.15. A pin of a nave of a back suspension bracket
   11.16. The bottom lever of a back suspension bracket
   11.17. The top lever of a back suspension bracket
   11.18. The directing lever of a back suspension bracket
   11.19. Draught of a back suspension bracket
   11.20. The stabilizer of cross-section stability of a back suspension bracket
   11.21. A side scene of the stabilizer of cross-section stability of a back suspension bracket
   11.22. A steering wheel
   11.23. A steering column
   11.24. An intermediate shaft of a steering column
   11.25. The ignition lock
   11.26. The steering mechanism
   11.27. Replacement of protective covers of the steering mechanism
   11.28. Removal of air from system of a steering with the amplifier
   11.29. The pump of the amplifier of a steering
   11.30. The spherical hinge of steering draught
   11.31. Steering draught
   11.32. Corners of installation of wheels
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

11.4. A forward rack

Removal

PERFORMANCE ORDER
1. Lift a forward part of the car and fix on supports. Remove a corresponding forward wheel.
2. Disconnect electric wires and hoses from a rack.
3. Unscrew bolts of fastening and release a suspension bracket of installation from a rotary fist.
4. Unscrew a nut of fastening of the bottom spherical hinge and take the spherical hinge from the bottom lever.
5. Unscrew a nut of fastening of a side scene of the stabilizer of cross-section stability to a rack and separate a side scene from a rack.
6. Unscrew a nut of a tightening bolt of a rotary fist.
7. Take tightening a bolt of fastening of a rack to a rotary fist. For prevention of lowering of a rotary fist with a nave at rack removal adhere a wire the bottom lever or a nave to the bottom frame.
8. Take a rack from a rotary fist. If the rack sits densely in a rotary fist, using the big screw-driver, unclench a clip of a rotary fist.
9. In a motor compartment remove a protective plastic cap from the top part of a forward rack.
10. Unscrew 3 bolts of the top fastening of a forward rack.
11. Take a rack from under a wheel arch. Temporarily arrange the bottom spherical hinge of a rotary fist in the bottom lever.

Installation

PERFORMANCE ORDER
1. Establish a forward rack into place so that the adjusting pin of a plate of the top fastening has correctly settled down in a corresponding aperture. Combine the bottom end of a rack with a rotary fist. Thus it is necessary to combine a crack in a clip of a rotary fist with a ledge on the rack end.
2. Screw the top bolts of fastening of a rack and tighten their demanded moment.
3. Be convinced that the bottom part of a rack is precisely combined with a rotary fist. Insert tightening a bolt from the back party of the car and fix its new nut.
4. Screw the bottom spherical hinge of a rotary fist on the bottom lever.
5. Connect a side scene of the stabilizer of cross-section stability to a rack.
6. Fix electric wires and hoses on a rack arm.
7. Establish a wheel and lower the car.