Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
- 13. An electric equipment
   13.1. Technical data
   13.2. Detection of not closed chain
   13.3. Safety locks and the relay
   13.4. Switches
   13.5. Bulbs of external illumination
   13.6. Lamps of illumination of salon
   13.7. Devices of external illumination
   13.8. Adjustment of light of headlights
   13.9. A combination of devices
   13.10. The multipurpose display
   13.11. Прикуриватель
   13.12. Hours
   13.13. A sound signal
   13.14. The screen wiper lever
   13.15. The screen wiper and draught engine
   13.16. A back screen wiper
   13.17. Стеклоомыватель
   13.18. An automobile radio tape recorder
   13.19. A column (dynamics)
   13.20. The aerial
   13.21. A cruise-control control system
   13.22. Anticreeping system and an engine immobilizer
   13.23. Electric units of forward sitting
   13.24. A safety pillow
   13.25. Elements of a pillow of safety
   + 13.26. Electric schemes
+ 14. The basic malfunctions

13.6. Lamps of illumination of salon

Replacement

CARS WITH THE TOP CONSOLE

PERFORMANCE ORDER
1. By means of a screw-driver remove a plafond of illumination of a forward part of salon from the top console.
2. Take a lamp of illumination of a forward part of salon, having pulled it from a cartridge.
3. Installation is made in sequence, return to removal.

CARS WITHOUT THE TOP CONSOLE

PERFORMANCE ORDER
1. Using a thin screw-driver, remove a lantern of illumination of salon from a ceiling.
2. Turn a cartridge with a bulb counter-clockwise and take it from a lantern.
3. For bulb replacement extend it from a cartridge.
4. Installation is made in sequence, return to removal.

BULBS OF ILLUMINATION OF THE COMBINATION OF DEVICES

PERFORMANCE ORDER
1. Remove a combination of devices.
2. Turn a bulb cartridge counter-clockwise and take from a back part of a combination of devices.
3. At replacement of bulbs of illumination of a combination of devices use only bulbs of the same type and capacity.
4. Establish a cartridge with bulbs in a combination of devices and turn it clockwise. Establish a combination of devices in the instrument panel.

LAMPS OF ILLUMINATION OF THE PANEL OF THE HEATER


PERFORMANCE ORDER
1. Remove the panel of a heater from the instrument panel.
2. Turn a cartridge with a bulb on or counter-clockwise and remove from the management block.
3. Take a bulb from a cartridge, having pulled it on itself.
4. Installation is made in sequence, return to removal.

LAMP OF ILLUMINATION OF HOURS

PERFORMANCE ORDER
1. Remove hours.
2. Turn a cartridge with a bulb on 90 and remove it from a lateral part of hours.
3. Installation is made in sequence, return to removal.

LAMP OF ILLUMINATION OF THE MULTIPURPOSE DISPLAY

PERFORMANCE ORDER
1. Remove the multipurpose display.
2. Turn a cartridge with a bulb on 90 and remove from the display.
3. Installation is made in sequence, return to removal.

BULBS OF ILLUMINATION OF SWITCHES

Bulbs of illumination of switches in most cases are an integral part of switches and cannot be replaced separately.