Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
- 13. An electric equipment
   13.1. Technical data
   13.2. Detection of not closed chain
   13.3. Safety locks and the relay
   13.4. Switches
   13.5. Bulbs of external illumination
   13.6. Lamps of illumination of salon
   13.7. Devices of external illumination
   13.8. Adjustment of light of headlights
   13.9. A combination of devices
   13.10. The multipurpose display
   13.11. Прикуриватель
   13.12. Hours
   13.13. A sound signal
   13.14. The screen wiper lever
   13.15. The screen wiper and draught engine
   13.16. A back screen wiper
   13.17. Стеклоомыватель
   13.18. An automobile radio tape recorder
   13.19. A column (dynamics)
   13.20. The aerial
   13.21. A cruise-control control system
   13.22. Anticreeping system and an engine immobilizer
   13.23. Electric units of forward sitting
   13.24. A safety pillow
   13.25. Elements of a pillow of safety
   + 13.26. Electric schemes
+ 14. The basic malfunctions

13.9. A combination of devices

Removal

PERFORMANCE ORDER
1. Remove the negative plug from the accumulator.
2. Remove a steering wheel.
3. By means of a thin screw-driver remove заглушку from a lateral part of the panel of devices from outside the driver.
4. Unscrew 3 screws (are specified by arrows) fastenings of the top part of a decorative overlay of a combination of devices.
5. Remove a decorative overlay of a combination of devices (a photo at the left) and take it (a photo on the right).
6. Unscrew 4 screws (are specified by arrows) fastenings of a combination of devices.
7. Insert a screw-driver between the top part of a combination of devices and the instrument panel and put forward a combination of devices from a nest.
8. Disconnect from a back part of a combination of devices of 2 electric sockets and take a combination of devices from the instrument panel.

Installation

PERFORMANCE ORDER
1. Connect to a combination of devices electric sockets, establish it in the instrument panel and fix screws.
2. Establish on the panel of devices a decorative overlay of a combination of devices and fix screws.
3. Connect the accumulator and check up working capacity of a combination of devices.