Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
- 13. An electric equipment
   13.1. Technical data
   13.2. Detection of not closed chain
   13.3. Safety locks and the relay
   13.4. Switches
   13.5. Bulbs of external illumination
   13.6. Lamps of illumination of salon
   13.7. Devices of external illumination
   13.8. Adjustment of light of headlights
   13.9. A combination of devices
   13.10. The multipurpose display
   13.11. Прикуриватель
   13.12. Hours
   13.13. A sound signal
   13.14. The screen wiper lever
   13.15. The screen wiper and draught engine
   13.16. A back screen wiper
   13.17. Стеклоомыватель
   13.18. An automobile radio tape recorder
   13.19. A column (dynamics)
   13.20. The aerial
   13.21. A cruise-control control system
   13.22. Anticreeping system and an engine immobilizer
   13.23. Electric units of forward sitting
   13.24. A safety pillow
   13.25. Elements of a pillow of safety
   + 13.26. Electric schemes
+ 14. The basic malfunctions


13.25. Elements of a pillow of safety Removal and installation

PERFORMANCE ORDER
1. Remove the negative plug from the accumulator, wait for 2 minutes and remove the central console. Remove an electric socket from the block of management of safety system.
Safety pillow from outside the driver
2. Unscrew 2 screws of fastening of a pillow the safety located from a back part of a steering wheel. For access to screws turn a steering wheel.
3. Establish a steering wheel for movement directly forward and remove from it a safety pillow. Disconnect an electric socket from a back part of a pillow of safety.
4. For installation connect an electric socket to a safety pillow, establish a pillow in the centre of a steering wheel and fix screws, having tightened their demanded moment. Thus first of all screw in the left screw of fastening.
5. Connect an electric socket to the block of management of a pillow of safety and establish the central console.
6. Check up that in salon of the car anybody is not present, and connect the accumulator. Through an open door turn a key in the lock of ignition and check up action of system of safety on fire of a control lamp.
Safety pillow from outside the passenger
7. Remove the panel of devices.
8. Unscrew nuts (fastenings of a pillow of safety are specified by arrows) and take it from the instrument panel.
9. Establish a safety pillow in the panel of devices and fix nuts.
10. Establish the panel of devices and connect the accumulator.
The block of management of a safety pillow
11. Unscrew nuts (fastenings are specified by arrows) and take the block of management of a pillow of safety from the car.
12. Establish the block of management of a pillow of safety so that the arrow in the top part of the block showed on a forward part of the car. Fix the block nuts, having tightened from demanded by the moment.
13. Connect an electric socket to the block and establish the central console.
14. Check up that in salon of the car anybody is not present, and connect the accumulator. Through an open door include ignition and check up safety system on inclusion of a control lamp of a pillow of safety.
Wire of inclusion of a pillow of safety
15. Remove a safety pillow from outside the driver and remove a steering wheel. Establish forward wheels for movement directly forward.
16. Unscrew screws of fastening of the bottom casing of a steering column and remove its top and bottom casings.
17. Disconnect an electric socket of system of the cruise-control or the autoradio tape recorder switch.
18. Track a wire downwards from contact of a pillow of safety and disconnect the electric socket located on a wire.
19. Unscrew screws (are specified by arrows in a photo at the left) and remove contact from the top part of a steering column (a photo on the right).
20. Before installation check up that contact of a pillow of safety is established according to labels (are specified by arrows) on the top part of contact and that forward wheels are established for movement directly forward.
21. Will come into contact of a pillow of safety, check up correctness of an arrangement of electroconducting and fix contact by screws.
22. Connect an electric socket of the wire going to contact of a pillow of safety.
23. Connect an electric socket of system of the cruise-control or inclusion of an autoradio tape recorder and establish casings on a steering column.
24. Establish a steering wheel and a safety pillow.