Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
- 13. An electric equipment
   13.1. Technical data
   13.2. Detection of not closed chain
   13.3. Safety locks and the relay
   13.4. Switches
   13.5. Bulbs of external illumination
   13.6. Lamps of illumination of salon
   13.7. Devices of external illumination
   13.8. Adjustment of light of headlights
   13.9. A combination of devices
   13.10. The multipurpose display
   13.11. Прикуриватель
   13.12. Hours
   13.13. A sound signal
   13.14. The screen wiper lever
   13.15. The screen wiper and draught engine
   13.16. A back screen wiper
   13.17. Стеклоомыватель
   13.18. An automobile radio tape recorder
   13.19. A column (dynamics)
   13.20. The aerial
   13.21. A cruise-control control system
   13.22. Anticreeping system and an engine immobilizer
   13.23. Electric units of forward sitting
   13.24. A safety pillow
   13.25. Elements of a pillow of safety
   + 13.26. Electric schemes
+ 14. The basic malfunctions


13.16. A back screen wiper

Removal and installation

PERFORMANCE ORDER
1. Remove the negative plug from the accumulator.
2. Remove the screen wiper lever.
Models a sedan (Saloon)
3. Unscrew a nut from an axis of a screen wiper and remove a washer with a rubber sealing ring.
4. From a luggage space disconnect an electric socket, unscrew nuts and take a screen wiper from a nest.
5. Remove from an axis of a screen wiper of a lining and a sealing ring.
Models комби (Estate)
6. Open a back door and remove from it furnish.
7. Unscrew nuts (are specified by arrows in a photo at the left) screen wiper fastenings, take it from a nest and disconnect from it an electric socket (a photo on the right).
8. Remove aligning plug of a screen wiper.
9. Remove linings and a rubber sealing ring from a back door.
10. Installation is made in sequence, return to removal.