Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions


12.6. A forward bumper

Removal and installation

PERFORMANCE ORDER
1. Remove headlights.
2. Lift a forward part of the car and fix on supports.
3. Unscrew screws of fastening left and right forward wheel loose leaves to a bumper. Separate each loose leaf from a bumper, unscrew fastening bolts, крепящие the left and right ends of a bumper to a body.
4. On cars with forward antifog headlights ослабьте скобы fastenings also disconnect electric sockets from antifog headlights.
5. Unscrew 2 top and 3 bottom bolts of fastening of a bumper.
6. Release the left and right locks of fastening (the fastening lock is specified by an arrow), located in nests for headlights, turning them on 90 .
7. Take a bumper directly forward from the car.
8. Installation is made in sequence, return to removal.