Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions

12.16. The luggage carrier lock

Removal

PERFORMANCE ORDER
1. Open a cover of a luggage carrier and disconnect the negative plug from the accumulator.
2. Remove percussion caps and furnish of a cover of a luggage carrier.
The luggage carrier lock
3. Unscrew bolts (a photo at the left), disconnect draught (a photo on the right) and remove the luggage carrier lock.
The cylinder of the lock of a luggage carrier
4. Unscrew screws of fastening of the case of the cylinder of the lock and remove decorative furnish and a lining from an outer side of a cover of a luggage carrier.
5. Disconnect draughts and remove the case of the cylinder of the lock from a luggage carrier cover.
6. Remove скобу fastenings of the lock of a luggage carrier.
7. Separate the lock button together with the case, marking an arrangement of springs (it is specified by arrows).
8. Take the cylinder of the lock of a luggage carrier.

Installation

PERFORMANCE ORDER
Installation is made in sequence of return to removal. Before installation of furnish of a luggage carrier check up working capacity of the lock.