Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions

12.21. External rear-view mirrors Removal and installation

PERFORMANCE ORDER
Rear-view mirror with manual adjustment
1. Remove a rubber protective cover from the handle of adjustment of a mirror and remove internal decorative furnish of a mirror from a door.
2. By means of a screw-driver take from doors заглушки. Unscrew screws and remove a mirror from a door.
Rear-view mirror with an electric drive
3. Remove decorative furnish of a mirror from the interior of a door.
4. By means of a screw-driver remove заглушки (are specified by arrows in a photo at the left) from the interior of a door, unscrew screws (fastenings are specified стрелкми in a photo on the right) and remove a mirror from a door.
5. Disconnect from a mirror electric sockets.
Mirror glass

The prevention

Mirror glass is fixed in the holder of a mirror конусным by connection. At removal of glass of its mirror it is very easy to break, therefore this work is necessary for carrying out in gloves.


6. Reject a mirror against the stop upwards and insert a wide plastic or wooden plate between glass and the holder of a mirror. Take the bottom part of a mirror from the holder.
7. Remove glass of a mirror and disconnect an electric socket (it is specified by an arrow) mirror heating.
The engine of management of mirror position
8. Remove mirror glass.
9. Unscrew fastening screws (are specified by arrows), remove the engine and disconnect from it an electric socket.
10. Installation is made in sequence, return to removal.