Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions

12.25. Seats

Removal and installation

PERFORMANCE ORDER
Forward seats
1. Unscrew the screw of fastening of a back part of external furnish of a seat (a photo at the left) and remove furnish upwards (a photo on the right).
2. Unscrew a bolt of fastening of a seat belt to the bottom part of a forward seat.
3. Shift a forward seat against the stop forward, unscrew screws of back fastening of a sled to a car floor.
4. Shift a forward seat against the stop back. Unscrew bolts of fastening of a forward part of a sled to a floor.
5. Raise a seat and disconnect an electric socket from the mechanism of a tension of a seat belt. At presence remove electric motors.
Back sitting (models with a developing back seat)
6. Remove rubber заглушки (it is specified by an arrow) from racks of installation of a pillow of a seat and unscrew fastening nuts.
7. Shift a seat pillow forward and raise it to disconnect clamps of a back part of a seat. Take a pillow of a back seat from the car.
8. For removal of lateral pillows unscrew a fastening bolt in the pillow basis.
9. Take a lateral pillow upwards from the car.
10. To remove a back of a back seat on models with separate backs, remove percussion caps (fastenings of a forward part of a carpet of a luggage space to a floor are specified by arrows in a photo at the left) and turn away a carpet back for access to bolts (fastenings of the central part of a seat are specified by arrows in a photo on the right).
11. Unscrew bolts of fastening of backs of a back seat to a body of the car and take them.
12. Installation is made in sequence, return to removal.






HoneFine