Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions


12.17. A back door

Removal

PERFORMANCE ORDER
Back door
1. Remove the negative plug from the accumulator.
2. Remove consolidation of a back door for access to electric wires in a back door.
3. Disconnect electric sockets (are specified by arrows) back door which are located in a forward part of the left back rack.
4. Remove condensing ring and take a plait of wires from a body.
5. Disconnect an electric socket (1), unscrew the screw of fastening of the tyre of grounding (2) to the right back rack.
6. Disconnect a washer hose, remove condensing ring and take wires and a washer hose.
7. A pencil note position of each hinge on a back door.
8. Supporting a back door, remove скобы fastenings and disconnect racks of support of a back door.
9. Unscrew bolts (fastenings are specified by arrows) and remove a back door from the car.
10. If it is necessary to replace hinges of a back door, note a pencil their position and remove the top furnish of a back door in salon.
11. Supporting a ceiling upholstery, unscrew nuts of fastening of hinges of a door and remove them. Establish new hinges, having combined them with the labels made before removal the top part of furnish of a door.
Rack of support of a back door
12. Remove скобы fastenings and disconnect a rack of support of a back door from spherical hinges.

Installation

PERFORMANCE ORDER
Back door
1. Installation is made in sequence of return to removal. Thus it is necessary to combine hinges with the labels put before removal of a door.
Rack of support of a back door
2. Installation is made in sequence of return to removal. Check up that the rack is reliably fixed on spherical hinges скобами fastenings.