Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions


12.26. The mechanism of a tension of a seat belt of a forward seat
THE GENERAL DATA

The system is intended for instant убирания any sagging in a seat belt in case of a head-on collision therefore life threat to forward passengers decreases. Each forward seat is equipped by system with the mechanism of a tension of the belt, attached directly to the seat belt lock. The mechanism of a tension of a belt copes the block of management of a pillow of safety. When the system of a tension of a belt works, fuel in the cylinder of the mechanism of a tension that the piston of the mechanism of a tension therefore seat belt sagging leaves forces to move forward lights up. After operation of the mechanism of a tension it is subject to replacement. That the mechanism of a tension has not worked at carrying out of repair work on the car, it is necessary to disconnect the accumulator and to disconnect an electric socket from a control panel a belt and a safety pillow.


The prevention

Before performance of any actions on a seat belt disconnect the negative plug from the accumulator and wait at least for 2 minutes. Further remove the central panel and disconnect a socket from the block of management of a tension of a seat belt.

Do not subject the mechanism of a tension to heating above 100 With.