Peugeot 406

Since 1996 of release

Repair and car operation


Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions

12.7. A back bumper

Removal and installation

PERFORMANCE ORDER
1. On models a sedan (Saloon) from an internal part of a luggage space unscrew fastening screws (are specified by arrows in a photo at the left) and remove back furnish of a luggage carrier (a photo on the right).
2. Unscrew screws and remove plates of fastening of the left and right corners of furnish of a luggage space.
3. Remove fastening percussion caps (take the central pins then take a percussion cap) and release lateral furnish of a luggage carrier for access to bumper fastening.
4. On models комби (Estate) open a back door and remove a basic surface from the basis and lateral faces. Unscrew screws and remove a back plate of furnish. Remove the left and right bottom lateral furnish of a luggage carrier. Remove percussion caps of fastening of lateral furnish of a luggage carrier to a floor. Release скобы fastenings and remove plastic branch for storage.
5. On all models unscrew nuts and remove assemblage of ventilation from the right back corner of a luggage space.
6. From under the car unscrew screws (are specified by arrows) fastenings of a back part of the loose leaf of a wheel to a bumper.
7. Displace loose leaves from a bumper and unscrew nuts, крепящие the left and right ends of a back bumper to a body.
8. Unscrew bolts of fastening of a back bumper to a body.
9. In a luggage space unscrew 6 nuts of fastening of the top part of a back bumper.
10. On models a sedan (Saloon) disconnect an electric socket of illumination of licence plate which is located about the left lantern of a backing.
11. Release the ends of a bumper and remove it from the car, releasing condensing ring of electric wires of illumination of licence plate from a body.
12. Installation is made in sequence, return to removal.