Peugeot 406

Since 1996 of release

Repair and car operation


Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions

12.8. A cowl

Removal

PERFORMANCE ORDER
1. Open a cowl and place rags under cowl corners to exclude body damages at cowl removal.
2. Disconnect a hose стеклоомывателя on the right side of a cowl.
3. For correct installation of a cowl into place a soft pencil note position of nuts on a cowl.
4. Supporting a cowl, remove скобы fastenings and separate racks of support from a cowl.
5. Unscrew the left and right nuts of fastening of hinges to a cowl and remove a cowl.

Installation

PERFORMANCE ORDER
Establish a cowl into place and fix nuts, tightening them by hand. Level a cowl according to earlier made labels and screw up nuts definitively. Adjust cowl position so that at the closed cowl the backlash on its perimetre was identical from different directions. For adjustment of a forward part of a cowl on height it is necessary to screw in or unscrew the rubber pillows located on a forward part of a motor compartment