Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. A suspension bracket and a steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward bearings of a nave
   11.4. A forward rack
   11.5. Repair of a forward rack
   11.6. The bottom lever of a forward suspension bracket
   11.7. The bottom spherical hinge of a forward suspension bracket
   11.8. The stabilizer of cross-section stability of a forward suspension bracket
   11.9. A side scene of the stabilizer of cross-section stability of a forward suspension bracket
   11.10. The bottom frame of a forward suspension bracket
   11.11. A nave of a back wheel
   11.12. Replacement of bearings of a back nave
   11.13. The shock-absorber of a back suspension bracket
   11.14. A cylindrical spring of a back suspension bracket
   11.15. A pin of a nave of a back suspension bracket
   11.16. The bottom lever of a back suspension bracket
   11.17. The top lever of a back suspension bracket
   11.18. The directing lever of a back suspension bracket
   11.19. Draught of a back suspension bracket
   11.20. The stabilizer of cross-section stability of a back suspension bracket
   11.21. A side scene of the stabilizer of cross-section stability of a back suspension bracket
   11.22. A steering wheel
   11.23. A steering column
   11.24. An intermediate shaft of a steering column
   11.25. The ignition lock
   11.26. The steering mechanism
   11.27. Replacement of protective covers of the steering mechanism
   11.28. Removal of air from system of a steering with the amplifier
   11.29. The pump of the amplifier of a steering
   11.30. The spherical hinge of steering draught
   11.31. Steering draught
   11.32. Corners of installation of wheels
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

11. A suspension bracket and a steering
THE GENERAL DATA

The independent forward suspension bracket of type MacPherson includes cylindrical springs and compound telescopic shock-absorbers.

Racks MacPherson fasten to the bottom cross-section levers of a suspension bracket by means of spherical hinges. On rotary fists wheel bearings, brake supports and a nave are established. The forward stabilizer of cross-section stability is established on all models. The stabilizer fastens through rubber plugs on the bottom frame and is connected directly with racks of a forward suspension bracket.

Independent back suspension bracket – multilever. Back naves are connected to the bottom frame top both the bottom levers and the directing lever.

The stabilizer of cross-section stability is fixed on the bottom frame and connected to naves side scenes.

The steering column has the universal hinge located from the bottom party which connects a steering shaft to the intermediate shaft having the second universal hinge in the bottom part. The bottom universal hinge connects a steering column to the steering mechanism by means of a tightening bolt.

The steering mechanism is established on a forward bottom frame and connected with two steering draughts spherical hinges on the external ends of steering draughts. On the ends of steering draughts there is a carving for adjustment of a convergence of forward wheels.

The hydraulic system of the amplifier of a steering has the pump which is put in action from a pulley коленвала.