Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
- 11. A suspension bracket and a steering
   11.1. Technical data
   11.2. Rotary fists
   11.3. Replacement of forward bearings of a nave
   11.4. A forward rack
   11.5. Repair of a forward rack
   11.6. The bottom lever of a forward suspension bracket
   11.7. The bottom spherical hinge of a forward suspension bracket
   11.8. The stabilizer of cross-section stability of a forward suspension bracket
   11.9. A side scene of the stabilizer of cross-section stability of a forward suspension bracket
   11.10. The bottom frame of a forward suspension bracket
   11.11. A nave of a back wheel
   11.12. Replacement of bearings of a back nave
   11.13. The shock-absorber of a back suspension bracket
   11.14. A cylindrical spring of a back suspension bracket
   11.15. A pin of a nave of a back suspension bracket
   11.16. The bottom lever of a back suspension bracket
   11.17. The top lever of a back suspension bracket
   11.18. The directing lever of a back suspension bracket
   11.19. Draught of a back suspension bracket
   11.20. The stabilizer of cross-section stability of a back suspension bracket
   11.21. A side scene of the stabilizer of cross-section stability of a back suspension bracket
   11.22. A steering wheel
   11.23. A steering column
   11.24. An intermediate shaft of a steering column
   11.25. The ignition lock
   11.26. The steering mechanism
   11.27. Replacement of protective covers of the steering mechanism
   11.28. Removal of air from system of a steering with the amplifier
   11.29. The pump of the amplifier of a steering
   11.30. The spherical hinge of steering draught
   11.31. Steering draught
   11.32. Corners of installation of wheels
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

11.18. The directing lever of a back suspension bracket

Removal

PERFORMANCE ORDER
1. Lift a back part of the car and fix on supports. Remove a corresponding back wheel.
2. Establish a jack under the external end of the bottom lever and lift it so that the suspension bracket spring was slightly compressed.
3. Unscrew a nut and take шарнирный a bolt of fastening of the directing lever to a pin.
4. Unscrew 3 bolts (fastenings of a suspension bracket of the directing lever to a body are specified by arrows) and remove assemblage of the directing lever.

Repair

PERFORMANCE ORDER
1. Unscrew a nut and take шарнирный a bolt, крепящий a forward suspension bracket of the directing lever.
2. Clear directing lever of a dirt and an anticorrosive covering and check up its condition.

Installation

PERFORMANCE ORDER
1. Grease bolts with universal greasing Molykote G Rapide Plus.
2. If the suspension bracket of the directing lever acted in film, establish шарнирный a bolt of fastening of a suspension bracket and screw a new nut, without tightening it it is definitive.
3. Establish directing lever into place and fix a lever suspension bracket to a body bolts.
4. Attach directing lever to a pin, without tightening a nut definitively.
5. Establish a wheel and lower the car. Shake the car that all elements of a suspension bracket have fallen into place. Tighten all bolts and nuts the demanded moment.