Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
- 12. A body
   12.1. The general information
   12.2. Care of a body
   12.3. Care of an upholstery and rugs
   12.4. Repair of insignificant damages of a body
   12.5. Repair of strong damages of a body
   12.6. A forward bumper
   12.7. A back bumper
   12.8. A cowl
   12.9. A cable of the lock of a cowl
   12.10. The cowl lock
   12.11. Doors
   12.12. A door upholstery
   12.13. The lock and handles of opening of a door
   12.14. Glasses of doors
   12.15. A luggage carrier cover
   12.16. The luggage carrier lock
   12.17. A back door
   12.18. The lock of a back door
   12.19. System of the central blocking
   12.20. Electric стеклоподъемники
   12.21. External rear-view mirrors
   12.22. Front and back has flown down
   12.23. The hatch
   12.24. Overlays and emblems
   12.25. Seats
   12.26. The mechanism of a tension of a seat belt of a forward seat
   12.27. Seat belts
   12.28. Salon furnish
   12.29. The central console
   12.30. The panel of devices
+ 13. An electric equipment
+ 14. The basic malfunctions

12.27. Seat belts

Removal and installation

PERFORMANCE ORDER
Seat belt of a forward seat
1. Remove the negative plug from the accumulator.
2. Remove a corresponding forward seat.
3. Remove скобы fastenings and take furnish under the panel of devices.
4. If work is carried out from outside the driver, unscrew a bolt and move aside the lever of opening of a cowl.
5. In car salon unscrew screws (are specified by arrows) and remove a forward lateral decorative overlay.
6. Unscrew the screw (it is specified by an arrow in a photo at the left) and remove an internal decorative overlay of a threshold (a photo on the right).
7. Remove consolidation of forward and back doors from the central rack.
8. Remove internal furnish of the central rack. Removal is necessary for beginning with the top part of a rack.
9. Unscrew screws (are specified by arrows) fastenings of a forward part of a decorative overlay of a threshold of a back door for access to an inertial drum of a tension of a seat belt.
10. For full removal of a decorative overlay of a threshold of a back door it is necessary to remove a back seat.
11. Unscrew 2 screws and remove directing a seat belt from the central rack.
12. Unscrew a bolt of the top fastening of a seat belt and separate a belt from a height regulator.
13. Unscrew a bolt (it is specified by an arrow) fastenings of an inertial drum of a seat belt and take a drum with a belt.
Seat belts of a back seat on models a sedan (Saloon)
14. Remove a pillow of a back seat and lateral pillows.
15. Unscrew a bolt of the bottom fastening of a seat belt to a floor.
16. Take percussion caps (are specified by arrows) fastenings of a forward part of a back shelf to a body.
17. Being careful, remove (a photo at the left) and take (a photo on the right) decorative overlays for belt passage through a back shelf.
18. Remove back dynamics (column).
19. Open a ware box in the centre of a back shelf and unscrew a bolt of fastening of a shelf.
20. Raise a first line of a shelf and, shifting forward, take it from a nest.
21. Unscrew a bolt of fastening of an inertial drum of a seat belt and remove it.
Seat belt of a back seat on models комби (Estate)
22. Open a back door and remove lateral consolidation from the demanded party. Remove the top internal furnish from a back rack and uncover lateral ware branch in a luggage carrier. Remove a luggage space covering.
23. Unscrew screws (are specified by arrows) fastenings of back furnish of a luggage space.
24. Remove back furnish of a luggage space (a photo at the left) and lateral back furnish of a luggage space (a photo on the right).
25. Uncover and unscrew the bottom bolt of fastening of a seat belt.
26. Remove a decorative overlay and unscrew a bolt of the top fastening of a belt from a rack, marking an arrangement of linings on the top fastening of a belt.
27. Unscrew a bolt of the top fastening of a seat belt.
28. At removal of washers and linings from a bolt of fastening of a belt it is necessary to note their relative positioning.
29. Remove a step washer from a bolt of the top fastening of a seat belt.
30. Remove consolidation of a lateral back door from a back rack (a photo at the left) and internal furnish of a lateral back rack (a photo on the right).
31. Using a screw-driver, remove a lattice of ventilation from the bottom part of back lateral glass.
32. Unscrew fastening screws (are specified by arrows in a photo at the left) and remove a lateral decorative overlay of a luggage space (a photo on the right).
33. Unscrew bolts (a photo at the left) and remove an inertial drum of a seat belt.
34. Installation is made in sequence, return to removal.