Peugeot 406

Since 1996 of release

Repair and car operation

Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
- 9. Power shafts
   9.1. Technical data
   9.2. Removal and installation of power shafts
   9.3. Replacement of covers of hinges of equal angular speeds
   9.4. Replacement of the intermediate bearing of the right power shaft
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

9.4. Replacement of the intermediate bearing of the right power shaft

The prevention

For bearing removal it is necessary to use a special stripper.

1. Remove the right power shaft.
2. Check up a condition of the bearing which should rotate easily and in regular intervals and should not have люфта between an internal and external ring. If necessary replace the bearing.
3. Using a universal stripper with the big course, remove the intermediate bearing from a power shaft. Grease an internal ring of the new bearing, using a hammer and a corresponding tube which rests against an internal ring of the bearing. Establish the new bearing on a power shaft.
4. Check up, that the bearing rotated easily and in regular intervals.