Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. The engine
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical data
      3.2.2. Check of pressure of compression
      3.2.3. Mechanism installation timing
      3.2.4. A cover of a head of the block of cylinders
      3.2.5. A pulley of a cranked shaft
      3.2.6. A casing of a gear belt
      3.2.7. A gear belt
      + 3.2.8. Pulleys of a gear belt
      + 3.2.9. The right engine mount and the mechanism of a tension of a gear belt
      3.2.10. A directing roller of a gear belt
      3.2.11. A cam-shaft and pushers
      3.2.12. Check and adjustment of backlashes of valves
      + 3.2.13. Removal and installation of a head of the block of cylinders (engines of 1.9 litres)
      3.2.14. Removal and installation of the oil pallet
      3.2.15. Removal and installation of the oil pump
      + 3.2.16. Replacement of sealing rings коленвала
   + 3.3. Engine repair
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

3.2.6. A casing of a gear belt Removal

ENGINES OF 1.9 LITRES

PERFORMANCE ORDER
The top forward casing
1. Unscrew the screw of fastening and remove a casing from the engine.
The top back casing
2. Remove a forward casing, unscrew bolts of fastening and remove a back casing.
The bottom casing
3. Remove a pulley of a cranked shaft.
4. Remove both top casings.
5. Unscrew bolts of fastening and remove the bottom casing.

ENGINES OF 2.0 LITRES

PERFORMANCE ORDER
The top casing
1. Unscrew a fastening bolt (it is specified by an arrow), located in the casing centre.
2. Turn the top connector on a turn quarter clockwise to remove blocking.
3. Remove the top casing from the engine.
The central casing
4. Remove auxiliary приводной a belt.
5. Unscrew two bolts and remove the central casing closing a pulley of the fuel pump.
The bottom casing
6. Remove a pulley of a cranked shaft.
7. Remove the right suspension bracket of the power unit.
8. Remove the top central casings.
9. Unscrew bolts of fastening and remove the bottom casing.

Installation

Installation is made in sequence, return to removal.