Peugeot 406

Since 1996 of release

Repair and car operation

10.14. A brake pedal

Removal

PERFORMANCE ORDER

1. Remove the negative plug from the accumulator. 2. Uncover boxes with fuses. Disconnect a socket from key колодки, unscrew screws of fastening and remove the bottom furnish of the panel of devices from outside the driver. 3. Remove скобу fastenings and take a pin with a head and an aperture under шплинт, крепящий a pusher of a pedal of a brake with the vacuum amplifier. 4. Unscrew a nut шарнирного a bolt and remove a brake pedal from the car.

Installation

PERFORMANCE ORDER

1. Grease with universal greasing a lining and insert it into an aperture of a point of turn of a pedal. 2. Establish a brake pedal into place. Thus check up, that the pusher became on the place. Insert шарнирный a bolt and fix a nut. 3. Combine a pedal with a pusher and insert a pin with a head and an aperture under шплинт and fix it скобами. 4. Establish the bottom furnish of the panel of devices and connect the accumulator.