Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
- 8. Transmissions
   + 8.1. A mechanical transmission
   - 8.2. An automatic transmission
      8.2.1. Technical data
      8.2.2. Oil replacement in a transmission
      8.2.3. Removal and installation of a cable of the selector
      8.2.4. Removal and installation of a drive of a speedometer
      8.2.5. Removal and cooler installation
      8.2.6. Removal and installation of the multipurpose switch
      8.2.7. Removal and installation of the electronic control device (ECU)
      8.2.8. Removal and installation of an automatic transmission
      8.2.9. Major repairs of an automatic transmission
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

8.2.6. Removal and installation of the multipurpose switch Removal

PERFORMANCE ORDER
1. For access improvement to the switch remove the case of the air filter and inlet channels.
2. Establish the selector lever in position "N".
3. Note position of the lever of the selector concerning the switch.
4. By means of the lever remove a cable from the selector lever on the multipurpose switch.
5. Track electroconducting from the switch to a socket and disconnect a socket.
6. Remove electroconducting of the switch with скобы supports on a transmission.
7. Unscrew a nut of fastening of the lever and remove the lever of the selector from a switch shaft.
8. Unscrew the switch and remove it with картера transmissions.

Installation

Installation is made in sequence, return to removal.