Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
- 8. Transmissions
   + 8.1. A mechanical transmission
   - 8.2. An automatic transmission
      8.2.1. Technical data
      8.2.2. Oil replacement in a transmission
      8.2.3. Removal and installation of a cable of the selector
      8.2.4. Removal and installation of a drive of a speedometer
      8.2.5. Removal and cooler installation
      8.2.6. Removal and installation of the multipurpose switch
      8.2.7. Removal and installation of the electronic control device (ECU)
      8.2.8. Removal and installation of an automatic transmission
      8.2.9. Major repairs of an automatic transmission
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

8.2.5. Removal and cooler installation
THE GENERAL DATA

Transmission cooler

3. A cooler

4. Fastening bolts

5. Linings

6. A washer

Removal

PERFORMANCE ORDER
1. The cooler is established on the top part картера transmissions. For access to a cooler remove the case of the air filter and inlet channels.
2. Disconnect a socket from a suspension bracket of the support located above a cooler, then remove a support suspension bracket.
3. Using clips, press hoses of a supply of a cooling liquid to a cooler.
4. Disconnect both hoses of system of cooling from a cooler.
5. Unscrew two bolts of fastening of a cooler and remove it from a transmission.

Installation

PERFORMANCE ORDER
Installation is made in sequence, return to removal. Check up liquid level in system of cooling and oil level in a transmission.