Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
- 7. Coupling
   7.1. Technical data
   7.2. A coupling cable
   7.3. A coupling pedal
   7.4. A hydraulic control system of coupling
   7.5. Leading knot of coupling
   7.6. The mechanism of deenergizing of coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

7.3. A coupling pedal

Removal

PERFORMANCE ORDER
1. Disconnect the negative plug of the accumulator.
2. In car salon open a cover of an immobilizer and turn on 90 a clamp of a cover of a box with fuses. Disconnect an electric socket from колодки, unscrew screws of fastening and remove the bottom panel from outside the driver.
3. On engines with тросовым a drive of deenergizing of coupling remove a cable of coupling from a pedal.
4. On models with a hydraulic drive of deenergizing of coupling remove the spherical hinge of a pusher of the main cylinder from a pedal.
5. Unscrew a bolt and a nut and remove a coupling pedal.

Installation

PERFORMANCE ORDER
1. Grease points of turn of a pedal of coupling.
2. Insert a pedal into place and fix its bolt and a nut.
3. Connect a cable of coupling or a pusher of the main cylinder to a pedal.
4. Some times press a coupling pedal.
5. Establish earlier removed elements in the bottom part of the panel and connect the accumulator.