Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
- 5. Fuel system
   + 5.1. The power supply system of petrol engines
   - 5.2. Fuel system of diesel engines
      5.2.1. Technical data
      5.2.2. Filling and prorolling of fuel system
      5.2.3. The air filter and air inlet channels
      5.2.4. An accelerator cable
      5.2.5. An accelerator pedal
      5.2.6. Adjustment of the fuel pump of a high pressure
      5.2.7. The electromagnetic valve of a stop of the engine
      5.2.8. The fuel pump of high pressure Bosch
      5.2.9. The fuel pump of high pressure Lucas
      5.2.10. Installation of the moment of injection
      5.2.11. Installation of the moment of injection on ТНВД Bosch
      5.2.12. Installation of the moment of injection on ТНВД Lucas
      5.2.13. Fuel atomizers
      5.2.14. Gauges and executive mechanisms of system Bosch AS3
      5.2.15. Gauges and executive mechanisms (Lucas EPIC)
      5.2.16. An inlet collector
      5.2.17. A final collector
      5.2.18. Турбонагнетатель
      5.2.19. Removal and installation турбонагнетателя
      5.2.20. Check турбонагнетателя
      5.2.21. An intermediate cooler
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

5.2.3. The air filter and air inlet channels

Removal

THE AIR FILTER

PERFORMANCE ORDER
1. Ослабьте collars also remove the inlet channel from the case of the air filter.
2. On engines of 1.9 litres disconnect a cable of an accelerator from a cover of the air filter. On engines of 2.1 litres remove a hose of a cooling liquid and an oil separator from a filter cover.
3. Unscrew screws of fastening of a cover of the air filter. Lift a cover and take filtering element.
4. Remove the case of the air filter upwards that it was possible to disconnect all bottom elements. On some models it is necessary to disconnect a small plastic element of fastening (it is specified by an arrow), крепящий the case to the bottom tube of an air inlet.
5. To lift the receiver an air inlet, unscrew bolts of a suspension bracket of the case of the air filter and remove a suspension bracket. Release other end of a tube of an air inlet and remove it.

INLET CHANNELS

Inlet air channels are the difficult system consisting of flexible hoses and rigid channels, connecting the air filter, a refrigerator and турбонагнетатель.

Inlet channels settle down in the top and back part of the engine, and on engines in volume of 2.1 litres from an engine underside between the block of cylinders and the pallet. For removal of tubes from an engine underside it is necessary to lift a forward part of the car.
PERFORMANCE ORDER
1. To remove an inlet pipe or the channel it is necessary to weaken collars on the ends of a pipe and to unscrew bolts of fastening of a pipe to an arm. On engines in volume of 2.1 litres for removal of a forward air pipe it is necessary to disconnect an electric socket of the gauge of temperature of soaked up air.
2. After easing of collars remove the end of a pipe from the union.

Installation

Installation is made in sequence, return to removal.