Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
- 5. Fuel system
   + 5.1. The power supply system of petrol engines
   - 5.2. Fuel system of diesel engines
      5.2.1. Technical data
      5.2.2. Filling and prorolling of fuel system
      5.2.3. The air filter and air inlet channels
      5.2.4. An accelerator cable
      5.2.5. An accelerator pedal
      5.2.6. Adjustment of the fuel pump of a high pressure
      5.2.7. The electromagnetic valve of a stop of the engine
      5.2.8. The fuel pump of high pressure Bosch
      5.2.9. The fuel pump of high pressure Lucas
      5.2.10. Installation of the moment of injection
      5.2.11. Installation of the moment of injection on ТНВД Bosch
      5.2.12. Installation of the moment of injection on ТНВД Lucas
      5.2.13. Fuel atomizers
      5.2.14. Gauges and executive mechanisms of system Bosch AS3
      5.2.15. Gauges and executive mechanisms (Lucas EPIC)
      5.2.16. An inlet collector
      5.2.17. A final collector
      5.2.18. Турбонагнетатель
      5.2.19. Removal and installation турбонагнетателя
      5.2.20. Check турбонагнетателя
      5.2.21. An intermediate cooler
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions


5.2.17. A final collector

Removal

ENGINES IN VOLUME OF 1.9 LITRES

PERFORMANCE ORDER
1. Remove an inlet collector.
2. Remove турбонагнетатель.
3. On some models unscrew a bolt from a flange of a reception exhaust pipe.
4. Unscrew six nuts of fastening of a final collector.
5. Remove a final collector from a head of the block of cylinders together with a lining.
6. The hairpins unscrewed from a head of the block of cylinders at unscrewing of nuts, after collector removal screw in back.

ENGINES IN VOLUME OF 2.1 LITRES


The prevention

In connection with insufficiency of a place for removal of a final collector on the engine established in the car, it is necessary to remove the power unit preliminary.


PERFORMANCE ORDER
1. Remove the power unit.
2. Remove a screw clip of fastening of a flexible part of an EGR-pipe to a collector.
3. Unscrew a connecting nut and remove bringing pipe of oil from the top part турбонагнетателя.
4. Unscrew two bolts and disconnect a flange returnable маслопровода () from турбонагнетателя (In – a bolt of fastening of a suspension bracket).
5. Unscrew a suspension bracket bolt турбонагнетателя.
6. Unscrew nuts of fastening of a collector and remove a collector with турбонагнетателем.

Installation

PERFORMANCE ORDER
1. Installation is made in sequence, return to removal.
2. Consider following moments:
     – At installation replace all linings;
     – On engines in volume of 1.9 litres establish турбонагнетатель and a final collector;
     – On engines in volume of 2.1 litres fix EGR a pipe a special screw clip;
     – On engines in volume of 2.1 litres establish the power unit.