Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
- 5. Fuel system
   - 5.1. The power supply system of petrol engines
      5.1.1. Technical data
      5.1.2. The air filter and inlet channels
      5.1.3. An accelerator cable
      5.1.4. An accelerator pedal
      5.1.5. System of injection of fuel
      5.1.6. Pressure removal in fuel system
      5.1.7. The fuel pump
      5.1.8. A fuel tank
      5.1.9. Check of fuel system
      5.1.10. The case throttle заслонки
      5.1.11. System of injection Bosch Motronic MP511
      5.1.12. System of injection Magneti Marelli 8P
      5.1.13. An inlet collector
      5.1.14. A final collector
      5.1.15. System of release of the fulfilled gases
   + 5.2. Fuel system of diesel engines
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions


5.1.15. System of release of the fulfilled gases
THE GENERAL DATA

System of release of the fulfilled gases the multisection. The reception exhaust pipe is attached by bolts with an internal sealing ring. The catalyst is located in a forward part of an exhaust system.

The system of release of the fulfilled gases is suspended to a body on rubber pillows.

Each section of system of release of the fulfilled gases can be removed separately or after removal of all system of release.

Removal

RECEPTION EXHAUST PIPE

PERFORMANCE ORDER
1. For removal of system of release of the fulfilled gases establish the car over a viewing hole or lift on the lift.
2. Unscrew fastenings (are specified by arrows) reception exhaust pipe to a collector.
3. Unscrew fastenings of a reception exhaust pipe to an intermediate exhaust pipe. Remove a reception exhaust pipe together with ring consolidations from under the car.

INTERMEDIATE EXHAUST PIPE AND THE MUFFLER

PERFORMANCE ORDER
1. For removal of system of release of the fulfilled gases establish the car over a viewing hole or lift on the lift.
2. Unscrew bolts of a coupling ring and disconnect an intermediate pipe from a reception exhaust pipe and a back exhaust pipe. On some cars the tyre of grounding which fastens to a bolt of a coupling ring can be established.
3. Disconnect an intermediate pipe from rubber pillows and remove it from under the car.

BACK EXHAUST PIPE AND THE MUFFLER

Removal

PERFORMANCE ORDER
1. For removal of system of release of the fulfilled gases establish the car over a viewing hole or lift on the lift.
2. Ослабьте a bolt of fastening of a coupling ring also disconnect a back exhaust pipe from the intermediate.
3. Disconnect a back exhaust pipe from rubber pillows of a suspension bracket and take from under the car.

HEAT-SHIELDING SCREENS

Heat-shielding screens are attached to a body and can be removed after removal of corresponding section of system of release of the fulfilled gases.