Peugeot 406

Since 1996 of release

Repair and car operation

Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
- 5. Fuel system
   - 5.1. The power supply system of petrol engines
      5.1.1. Technical data
      5.1.2. The air filter and inlet channels
      5.1.3. An accelerator cable
      5.1.4. An accelerator pedal
      5.1.5. System of injection of fuel
      5.1.6. Pressure removal in fuel system
      5.1.7. The fuel pump
      5.1.8. A fuel tank
      5.1.9. Check of fuel system
      5.1.10. The case throttle заслонки
      5.1.11. System of injection Bosch Motronic MP511
      5.1.12. System of injection Magneti Marelli 8P
      5.1.13. An inlet collector
      5.1.14. A final collector
      5.1.15. System of release of the fulfilled gases
   + 5.2. Fuel system of diesel engines
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

5.1.14. A final collector


1. Disconnect a branch pipe of a fence of the warmed-up air from a final collector.
2. Unscrew three bolts and remove a casing заборника the warmed-up air.
3. Block back wheels and lift a forward part of the car.
4. Disconnect electric wires from the ljambda-gauge.
5. Unscrew nuts of fastening of a reception exhaust pipe to a collector.
6. Unscrew nuts of fastening of a final collector to a head of the block of cylinders.
7. Take a collector from a motor compartment and remove a collector lining.


1. Installation is made in sequence, return to removal.
2. Consider following moments:
     – Check up a final collector on deterioration and corrosion presence;
     – Clear interfaced surfaces of a collector and a head of the block of cylinders of traces of old linings. Establish new linings and a collector;
     – Connect a reception exhaust pipe to a collector.