Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. The engine
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical data
      3.2.2. Check of pressure of compression
      3.2.3. Mechanism installation timing
      3.2.4. A cover of a head of the block of cylinders
      3.2.5. A pulley of a cranked shaft
      3.2.6. A casing of a gear belt
      3.2.7. A gear belt
      - 3.2.8. Pulleys of a gear belt
         3.2.8.1. A camshaft pulley
         3.2.8.2. A pulley коленвала
         3.2.8.3. A pulley of the fuel pump of a high pressure
         3.2.8.4. A pulley of the pump of system of cooling
      + 3.2.9. The right engine mount and the mechanism of a tension of a gear belt
      3.2.10. A directing roller of a gear belt
      3.2.11. A cam-shaft and pushers
      3.2.12. Check and adjustment of backlashes of valves
      + 3.2.13. Removal and installation of a head of the block of cylinders (engines of 1.9 litres)
      3.2.14. Removal and installation of the oil pallet
      3.2.15. Removal and installation of the oil pump
      + 3.2.16. Replacement of sealing rings коленвала
   + 3.3. Engine repair
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



3.2.8. Pulleys of a gear belt

3.2.8.1. A camshaft pulley Removal

PERFORMANCE ORDER
1. Remove a gear belt.
2. Unscrew a bolt of fastening of a pulley of a cam-shaft. For fixing of a cam-shaft from проворачивания it is necessary to use the special tool fixing a pulley (or, on engines of 1.9 litres, uncover heads and keep a cam-shaft from проворачивания a wrench for a ledge between 3 and 4 cams).
3. Unscrew an adjusting bolt from a cam-shaft pulley.
4. Remove a pulley from a cam-shaft. If necessary remove segment шпонку. Check up a sealing ring of a cam-shaft on tightness.

Installation

PERFORMANCE ORDER
1. Establish segment шпонку in a groove of a cam-shaft and a cam-shaft pulley.
2. Screw up a bolt of fastening of a pulley and tighten its corresponding moment, preliminary having fixed a cam-shaft from проворачивания.
3. If acted in film, establish a head cover.
4. Combine apertures in a pulley and a forward plate and fix 8 mm a bolt.
5. Establish a gear belt.
6. Establish casings of a gear belt.



canadian pharmacies without rx