Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. The engine
   + 3.1. Petrol engines
   - 3.2. Diesel engines
      3.2.1. Technical data
      3.2.2. Check of pressure of compression
      3.2.3. Mechanism installation timing
      3.2.4. A cover of a head of the block of cylinders
      3.2.5. A pulley of a cranked shaft
      3.2.6. A casing of a gear belt
      3.2.7. A gear belt
      + 3.2.8. Pulleys of a gear belt
      + 3.2.9. The right engine mount and the mechanism of a tension of a gear belt
      3.2.10. A directing roller of a gear belt
      3.2.11. A cam-shaft and pushers
      3.2.12. Check and adjustment of backlashes of valves
      - 3.2.13. Removal and installation of a head of the block of cylinders (engines of 1.9 litres)
         3.2.13.1. A choice of a lining of a head of the block of cylinders
         3.2.13.2. Check of bolts of a head of the block of cylinders
      3.2.14. Removal and installation of the oil pallet
      3.2.15. Removal and installation of the oil pump
      + 3.2.16. Replacement of sealing rings коленвала
   + 3.3. Engine repair
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

3.2.13.2. Check of bolts of a head of the block of cylinders
PERFORMANCE ORDER
1. It is recommended to make replacement of bolts of fastening of a head of the block of cylinders each time at head removal.
2. Measure length of a bolt from the basis of a head of a bolt till the end of a bolt and compare it to demanded value. At length of a bolt of 145,0-146,5 mm probably reuse of bolts with washers, and at большей is necessary to replace to length bolts and washers with the new.