Peugeot 406
+ 1. The maintenance instruction
- 2. Maintenance service
+ 2.1. Petrol models
- 2.2. Diesel models
2.2.1. Technical data
2.2.2. Periodicity of service
- 2.2.3. Maintenance service
+ 2.2.3.1. Each 10000 km or 12 months
2.2.3.2. Each 20 000 km
2.2.3.3. Each 30 000 km
+ 2.2.3.4. Each 60 000 km
2.2.3.5. Each 120 000 km or 2 years
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions
|
Operations on maintenance service same, as well as at cars with petrol engines, except following differences.
Replacement of a filtering element of the air filter
| PERFORMANCE ORDER |
|
|
1. Ослабьте a collar also remove the inlet channel from a cover of the case of the filter. |
|
|
| 2. On models of engines of 2.1 litres disconnect hoses of a cooling liquid (a photo at the left) and ventilation (a photo on the right) from a cover of the air filter. |
| 3. On models of engines of 1.9 litres remove a cable of an accelerator from a cover of the air filter. |
|
4. Unscrew screws of fastening of a cover of the air filter. |
|
5. Lift a cover and извлекте filtering element. |
| 6. Wipe the case and a cover of the air filter. |
| 7. Establish a new filtering element in the filter case. Close a cover and screw its screws. |
| 8. Establish ventilation and cooling hoses and an accelerator cable on the places. Establish the inlet channel and fix collars. |
|
Replacement of the fuel filter
The fuel filter is located in the plastic case in front of the engine.
| PERFORMANCE ORDER |
| 1. Place the container under a hose plum of fuel from the fuel filter, unscrew the screw of removal of water from the fuel filter and completely merge fuel from the fuel filter. |
| 2. Unscrew four bolts of fastening of a cover of the fuel filter and uncover. |
|
|
3. Take the filter from the case. |
| 4. Establish the new fuel filter and a cover. |
| 5. Cover a carving part of bolts with the structure interfering unscrewing, and screw up bolts. |
| 6. Close the screw plum of water from the fuel filter. |
|
|
|