Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
- 2. Maintenance service
   - 2.1. Petrol models
      2.1.1. Technical data
      2.1.2. Periodicity of service
      - 2.1.3. Maintenance service
         - 2.1.3.1. Each 15000 km or 12 months
            2.1.3.1.1. Replacement of oil and the oil filter
            2.1.3.1.2. Check of level of oil in an automatic transmission
            2.1.3.1.3. Check of tightness of hoses and вытекания liquids
            2.1.3.1.4. Replacement of the filter thin очитки air in ventilation system
            2.1.3.1.5. Check of work of coupling
            2.1.3.1.6. Check of a protective cover of a power shaft
            2.1.3.1.7. A steering and a suspension bracket
            2.1.3.1.8. Shock-absorber check
         + 2.1.3.2. Each 30 000 km
         + 2.1.3.3. Each 60000 km
         + 2.1.3.4. Each 120000 km or alternate years
   + 2.2. Diesel models
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions


2.1.3.1.6. Check of a protective cover of a power shaft
PERFORMANCE ORDER
1. Lift and carefully fix the car on supports. Turn a wheel to the right or to the left against the stop and twist a wheel. Examine rubber protective covers of the SHRUS, compressing them for disclosing of bends. Check up them on presence of cracks which can lead to greasing leak, and also to penetration in water and a dirt.
2. Also check up a condition of fixing collars. Examine covers of internal SHRUS and casings on the other hand. If any damage it is necessary to replace a casing immediately is found.
3. Also check up a condition of fixing collars. Examine covers of internal SHRUS and casings on the other hand. If any damage it is necessary to replace a casing immediately is found.
4. At the same time check up the general condition of the SHRUS, holding a shaft and simultaneously trying to turn a wheel. Repeat attempt, holding an internal SHRUS and turning a shaft. Any appreciable люфт specifies in deterioration of the SHRUS, deterioration in grooves of a shaft or unscrewing of a lock nut of a shaft.