Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
- 1. The maintenance instruction
   - 1.1. Introduction
      1.1.1. If the engine is not started and the starter does not work
      1.1.2. Start from an external source (other car)
      1.1.3. If the engine is not started, even if the starter works normally
      1.1.4. Check of tightness of connections
      1.1.5. Towage
      1.1.6. Places of weekly check
      1.1.7. The general panel of devices
      1.1.8. Remote infra-red management
      1.1.9. An identification card
      1.1.10. Blocking of back doors from opening by children
      1.1.11. Remote radio management of blocking of doors
      1.1.12. The opening lever лючка mouths of a fuel tank
      1.1.13. Electronic anticreeping system
      1.1.14. The valve of switching-off of giving of fuel
      1.1.15. Katalitichesky neutralizer
      1.1.16. The panel of devices (cars with the petrol and diesel engine)
      1.1.17. Panels of devices (cars with the petrol engine)
      1.1.18. The panel of devices (cars with an automatic transmission)
      1.1.19. Panels of devices (cars with the diesel engine)
      1.1.20. Signalling devices of the panel of devices
      1.1.21. A windscreen screen wiper
      1.1.22. An electroheater of back glass and external rear-view mirrors
      1.1.23. Adjustment of position of a steering wheel
      1.1.24. The onboard computer
      1.1.25. Heating and ventilation
      1.1.26. Air conditioner
      1.1.27. The automatic conditioner of air
      + 1.1.28. Safety pillows
      1.1.29. Hours, panel illumination
      1.1.30. A transmission
      1.1.31. A regulator of speed
      + 1.1.32. An electric equipment
      1.1.33. Wheels and tyres
      1.1.34. Car towage
      1.1.35. The identification data
      1.1.36. Technical characteristics
      1.1.37. The expense of fuel of cars
      1.1.38. An autoradio tape recorder 4030
      1.1.39. An autoradio tape recorder with CD-player 4050
      1.1.40. Management of devices of external illumination
      1.1.41. Adjustment of seats
      1.1.42. Adjustment of headlights
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions



1.1.27. The automatic conditioner of air
THE GENERAL DATA

Automatic mode of an air conditioning

In a mode “AUTO” the system provides automatic maintenance of the set temperature of air in car salon. Thus the electronic block of management regulates temperature and the expense of air arriving in salon through ventilating lattices, and also if necessary includes the conditioner.

The choice of a mode of distribution of air on salon is carried out manually.

In case of need the mode рециркуляции air automatically joins. At conditioner work in automatic control mode the central display 3 is switched off.

In a current of several seconds after ignition inclusion small noise from work of knots of the conditioner can be audible. This normal phenomenon.

Management of the conditioner in an automatic mode
1. Switching of modes рециркуляции air and forced ventilation
2. Inclusion and deenergizing of the conditioner of air
3. The display
4. The switch of the program of maintenance of a transparency of glasses. The program provides increase in giving of air arriving on having blown of a windscreen and glasses of forward doors, for example, at raised humidity. Thus there is no necessity of change of the appointed temperature of air. If the conditioner worked in a hand control mode, pressing the button includes the conditioner in an automatic mode. Through the central and lateral ventilating lattices passes a constant stream of air which depends on the set operating mode of the conditioner
5. The button of inclusion of a mode of the mixed distribution of air: air part goes on having blown in a windshield (thawing and condensate removal), and other part arrives in salon through the central and lateral ventilating lattices, and also through apertures of air lines in zones of an arrangement of feet of forward and back passengers
6. The button of inclusion of a mode of distribution of air: air receipt through the central and lateral ventilating lattices
7. The button of inclusion of a mode of distribution of air: air most part arrives in salon through the central and lateral lattices, and a smaller part – through apertures of air lines in zones of an arrangement of feet of forward and back passengers
8. The button of inclusion of a mode of distribution of air: air most part arrives in salon through apertures of air lines in zones of an arrangement of feet of forward and back passengers, and a smaller part – through the central and lateral lattices
9. Buttons for installation of value of temperature of air in salon. A possible range of temperatures: from 14 With to 30 With. The appointed temperature is deduced on the display. It is recommended to establish at first temperature at level nearby 22 With, and then smoothly to change installation to desirable value
10. Button "AUTO". Includes the maintenance program in salon of the most comfortable conditions, removal of a condensate from glasses is simultaneously provided. On the display indicator "AUTO" lights up
11. Regulation of the expense of air
A.Diagramma of a fan operating mode


The prevention

The control system of the conditioner includes the gauge of temperature of air, built in the top console, and the gauge of solar radiation located between nozzles обдува of a windscreen in a forward part of the control panel.


Hand control the conditioner

Regulation of giving of air is made by the button 11 “MAN”. Air giving increases or decreases by pressing accordingly on right or a button left edge. The established operating mode of the fan is reflected graphically in the display (diagramme). At a minimum level of giving of air one vertical strip burns. Fan deenergizing leads to conditioner deenergizing. Thus the fan symbol dies away and on the display the symbol “ECO” lights up.

The operating mode of system of ventilation is established by the button 1 “RECIRC”.

Рециркуляция air. On the display the symbol burns. Joins by unitary pressing the button. Access of external air to salon stops and by that hit of unpleasant smells and a dust is excluded. In a central air air which is in salon of the car circulates. The mode рециркуляции should be used only in exceptional cases.

Forced ventilation mode. On the display the symbol burns. Joins by repeated pressing of the button 1 “RECIRC”. In this mode in salon fresh external air arrives.

Air conditioner joins the button 2 “А/С”. By unitary pressing of the button 2 conditioner joins in automatic control mode (preliminary the conditioner worked in the same mode), on the display the symbol “А/С” lights up. Repeated pressing of the button 2 leads to conditioner deenergizing. Thus on the display the symbol “ЕСО” lights up. For return to an automatic mode press the button 10 “AUTO”. Thus symbols of manual control mode by the conditioner which burnt on the display, will go out.

Recommendations about conditioner use

For faster achievement of comfortable temperature of air in salon at first establish temperature at level 22 With, and then smoothly change installation to desirable value.

Use a hand control the conditioner only in the event that the discomfortable temperature of air in salon remains long time.

If the car is not maintained, manual installations of modes remain in memory of the block of management of the conditioner. However at strong change of temperature in salon in comparison with a preset value there is an automatic inclusion of the program of management by the conditioner which provides the fastest achievement of comfortable conditions. In any case press button "AUTO" for return to an automatic mode.