Peugeot 406

Since 1996 of release

Repair and car operation



Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
+ 10. Brake system
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
- 14. The basic malfunctions
   14.1. The engine
   14.2. Cooling system
   14.3. Fuel system and system of release of the fulfilled gases
   14.4. Coupling
   14.5. A mechanical transmission
   14.6. An automatic transmission
   14.7. Power shafts
   14.8. Brake system
   14.9. A suspension bracket and a steering


14.5. A mechanical transmission
THE GENERAL DATA

Extraneous noise in neutral position of a transmission:

 – Are worn out the bearing of an entrance shaft (noise is audible at the released pedal of coupling);
 – It is worn out выжимной the coupling bearing.

Noise at inclusion only one transfer:


 – Teeths of a gear wheel of one transfer are worn out or damaged.

The gear change is complicated:

 – Coupling damage;
 – Draughts of a gear change are worn out or damaged;
 – Draughts of a gear change are incorrectly adjusted;
 – Synchronizers are worn out.

Выбивание transfers:

 – Draught of a gear change is worn out or damaged;
 – Draughts of a gear change are incorrectly adjusted;
 – Synchronizers are worn out;
 – Plugs of inclusion of transfers are worn out.

Vibration:

 – Low level of oil;
 – Deterioration of bearings.

Oil leaks:

 – Deterioration of sealing rings of differential;
 – Deterioration of consolidation of an entrance shaft.