Peugeot 406

Since 1996 of release

Repair and car operation


Peugeot 406
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Systems of cooling, heating and ventilation
+ 5. Fuel system
+ 6. Ignition system
+ 7. Coupling
+ 8. Transmissions
+ 9. Power shafts
- 10. Brake system
   10.1. Technical data
   10.2. Prorolling of hydraulic brake system
   10.3. Brake pipelines and hoses
   10.4. Replacement of lobbies brake колодок
   10.5. Replacement back brake колодок
   10.6. Replacement back brake колодок on drum-type brakes
   10.7. A forward brake disk
   10.8. A back brake disk
   10.9. A back brake drum
   10.10. A support of a forward brake
   10.11. A support of a back wheel
   10.12. The back brake cylinder
   10.13. The main brake cylinder
   10.14. A brake pedal
   10.15. The vacuum amplifier of brakes
   10.16. The unilateral valve of the vacuum amplifier of brakes
   10.17. Adjustment of a manual brake
   10.18. The lever of a manual brake
   10.19. A cable of a manual brake
   10.20. Brake колодки a manual brake (model with disk brakes)
   10.21. The valve of adjustment of pressure in brake system
   10.22. The stoplight switch
   10.23. Antiblocking system of brakes (ABS)
   10.24. The vacuum pump (cars with the diesel engine)
   10.25. Check of the vacuum pump on cars with diesel engines
+ 11. A suspension bracket and a steering
+ 12. A body
+ 13. An electric equipment
+ 14. The basic malfunctions

10.19. A cable of a manual brake
THE GENERAL DATA

The cable of a manual brake consists of 3 parts: a forward part which includes the adjustment mechanism, the right and left back parts which connect back brakes to the adjustment mechanism on a forward cable.

Each part can be removed separately.

Removal

FORWARD PART OF THE MANUAL BRAKE

PERFORMANCE ORDER
1. Lift a back part of the car and fix on supports.
2. Remove the thermal screen and ослабьте a regulator as much as possible to weaken a cable of a manual brake.
3. Remove the central console.
4. Completely release a manual brake and disconnect a cable of a manual brake from the lever. Release a cover of a cable from скоб fastening and communications.
5. From below the car disconnect the right back cable from a forward regulator of a cable. Unscrew a regulator and disconnect the left back cable of a manual brake.
6. Release a forward cable from скоб fastening and communications and take it from under the car.

BACK PART OF THE CABLE OF THE MANUAL BRAKE (MODEL WITH DRUM-TYPE BRAKES)

PERFORMANCE ORDER
1. Lift a back part of the car and fix on supports.
2. Remove the thermal screen and ослабьте a regulator as much as possible to weaken a cable of a manual brake.
3. Remove a corresponding back brake drum.
4. Disconnect a cable of a manual brake from the lever brake колодки and take a cover of a cable from a brake board.
5. Release on all length a cable from скоб fastenings. Disconnect the right back cable from the mechanism of a regulator and unscrew the left back cable. Remove them from under the car.

BACK PART OF THE CABLE OF THE MANUAL BRAKE (MODEL WITH DISK BRAKES)

PERFORMANCE ORDER
1. Lift a back part of the car and fix on supports.
2. Remove the thermal screen and ослабьте a regulator as much as possible to weaken a cable of a manual brake.
3. Remove brake колодки a manual brake. Disconnect the mechanism of a drive of a manual brake from the end of a cable of a manual brake.
4. Take a cover of a cable from a brake board.
5. Release a cable from скоб fastenings.
6. Disconnect the right back cable from the regulator mechanism.
7. Unscrew the left back cable. Take cables from under the car.

Installation

Installation is made in sequence, return to removal.